Features

• Single-Cast Trunnion System results in incredible vibration control providing continuous smooth operation and dependable accuracy.
• Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations.
• The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4°.
• The Cabinet Construction consists of a large cast iron base providing stability and solid footing.
• Tool-Free Split Guard design allows a true rise-and fall riving knife by using a lever on the front of the saw or inside the throat plate. You can then add the anti-kickback paws and guard to the riving knife without tools.
• Table Top provides more surface area to stabilize the product and offers outstanding smoothness and superior ease.
• The Largest Blade Opening in class makes fine tuning your riving knife and blade changes easier than ever.
• The Push Button Arbor Lock makes the blade changing process simple and more natural with the use of only 1 wrench.
• Large, Easy to Access On/Off switch is multi-directional and can be activated from any angle.
• Bi-Level Dust Extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection.
• BIESEMEYER® Fence System provides hairline pointer and built-in tape allowing you to make precision set-ups, cut after cut. 9-ply fence faces have improved tolerances like no other as well as an improved cam front lock lever for an over lock with a curved edge.
• On-Board Miter Gauge Storage is conveniently located on the side of the cabinet and On-Board Wrench and Push Stick Storage is conveniently located beside the switch.
• UL Listed.

Specs

• Horsepower: 3 HP
• Voltage: 230V
• Phase: 1-Phase
• Hertz: 60 Hz
• Arbor Size: 5/8 in.
• Blade Diameter: 10 in.
• Blade Speed: 4300 RPM
• Max. Rip To Right Of Blade: 36 in.
• Max. Rip To Left Of Blade: 13-1/2 in.
• Depth of Cut at 45°: 2-1/8 in.
• Depth of Cut at 90°: 3-1/8 in.
• Distance – Front of Table to Center of Blade: 18-1/2 in.
• Distance – Table in Front of Saw at Max. Depth of Cut: 13-1/2 in.
• Max. Width of Dado: 1-1/8 in.
• Miter Gauge Groove: 3/8 in. x 3/4 in.
• Chip Exhaust Opening: 4 in. and 5 in.
• Table Height: 35 in.
• Size of Cast Iron Top (with wings only): 31 in. x 40 in.
• Table Size with BIESEMEYER® Table, Wing & Laminate Board: 31 in. x 64 in.
• Length: 66-1/2 in.
• Width: 37 in.
• Width with Fence on Saw: 46 in.
• Height: 35 in.
• Weight: 624 lbs.

Sold at

View the Warranty

5 Year Warranty
Download Owner's Manual
Download Service Parts List