Get ready for something radically different. The legendary UNISAW® has been redesigned from the ground up and is loaded with industry firsts. Like a conveniently located push-button arbor lock for quick, easy blade changes. Or a tool-free, split-design guarding system with a true rise and fall riving knife for through and non-through cuts. There’s even a BIESEMEYER® Fence accurate to 1/64 in. A single-cast trunnion system results in incredible vibration control providing continuous smooth operation and dependable accuracy. The bi-level dust extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection.
Features
- Single-Cast Trunnion System results in incredible vibration control providing continuous smooth operation and dependable accuracy.
- Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations.
- The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4°.
- Tool-Free Split Guard design allows a true rise-and fall riving knife by using a lever on the front of the saw or inside the throat plate. You can then add the anti-kickback paws and guard to the riving knife without tools.
- The Cabinet Construction consists of a large cast iron base providing stability and solid footing.
- Table Top provides more surface area to stabilize the product and offers outstanding smoothness and superior ease.
- The Largest Blade Opening in class makes fine tuning your riving knife and blade changes easier than ever.
- The Push Button Arbor Lock makes the blade changing process simple and more natural with the use of only 1 wrench.
- Large, Easy to Access On/Off switch is multi-directional and can be activated from any angle.
- Bi-Level Dust Extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection.
- BIESEMEYER® Fence System provides hairline pointer and built-in tape allowing you to make precision set-ups, cut after cut. 9-ply fence faces have improved tolerances like no other as well as an improved cam front lock lever for an over lock with a curved edge.
- On-Board Miter Gauge Storage is conveniently located on the side of the cabinet and On-Board Wrench and Push Stick Storage is conveniently located beside the switch.
- UL Listed.
Specs
- Horsepower: 5 HP
- Voltage: 230V
- Phase: 1-Phase
- Hertz: 60 Hz
- Arbor Size: 5/8 in.
- Blade Diameter: 10 in.
- Blade Speed: 4300 RPM
- Max. Rip To Right Of Blade: 52 in.
- Max. Rip To Left Of Blade: 13-1/2 in.
- Depth of Cut at 45°: 2-1/8 in.
- Depth of Cut at 90°: 3-1/8 in.
- Distance – Front of Table to Center of Blade: 18-1/2 in.
- Distance – Table in Front of Saw at Max. Depth of Cut: 13-1/2 in.
- Max. Width of Dado: 1-1/8 in.
- Miter Gauge Groove: 3/8 in. x 3/4 in.
- Chip Exhaust Opening: 4 in. and 5 in.
- Table Height: 35 in.
- Table Size of Cast-Iron Top (with wings only): 31 in. x 40 in.
- Table Size with BIESEMEYER® Table, Wing & Laminate Board: 31 in. x 82 in.
- Length: 84-1/2 in.
- Width: 37 in.
- Width with Fence on Saw: 46 in.
- Height: 35 in.
- Weight: 665 lbs.
Sold at
View the Warranty