36‑L536 -

5‑HP Motor 10 in. UNISAW® with 36 in. BIESEMEYER® Fence System

Category:
Tag:

Get ready for something radically different. The legendary UNISAW® has been redesigned from the ground up and is loaded with industry firsts. Like a conveniently located push-button arbor lock for quick, easy blade changes. Or a tool-free, split-design guarding system with a true rise and fall riving knife for through and non-through cuts. There’s even a BIESEMEYER® Fence accurate to 1/64 in. The bi-level dust extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection.

Features

  • Single-Cast Trunnion System results in incredible vibration control providing continuous smooth operation and dependable accuracy.
  • Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations.
  • The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4°.
  • The Cabinet Construction consists of a large cast iron base providing stability and solid footing.
  • Tool-Free Split Guard design allows a true rise-and fall riving knife by using a lever on the front of the saw or inside the throat plate. You can then add the anti-kickback paws and guard to the riving knife without tools.
  • Table Top provides more surface area to stabilize the product and offers outstanding smoothness and superior ease.
  • The Largest Blade Opening in class makes fine tuning your riving knife and blade changes easier than ever.
  • The Push Button Arbor Lock makes the blade changing process simple and more natural with the use of only 1 wrench.
  • Large, Easy to Access On/Off switch is multi-directional and can be activated from any angle.
  • Bi-Level Dust Extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection.
  • Tool-free split guard design allows a true rise-and fall riving knife by using a lever on the front of the saw or inside the throat plate. You can then add the anti-kickback paws and guard to the riving knife without tools
  • BIESEMEYER® Fence System provides hairline pointer and built-in tape allowing you to make precision set-ups, cut after cut. 9-ply fence faces have improved tolerances like no other as well as an improved cam front lock lever for an over lock with a curved edge.

Specs

  • Horsepower: 3 HP
  • Voltage: 230V
  • Phase: 1-Phase
  • Hertz: 60 Hz
  • Arbor Size: 5/8 in.
  • Blade Diameter: 10 in.
  • Blade Speed: 4300 RPM
  • Max. Rip To Right Of Blade: 52 in.
  • Max. Rip To Left Of Blade: 13-1/2 in.
  • Depth of Cut at 45°: 2-1/8 in.
  • Depth of Cut at 90°: 3-1/8 in.
  • Distance – Front of Table to Center of Blade: 18-1/2 in.
  • Distance – Table in Front of Saw at Max. Depth of Cut: 13-1/2 in.
  • Max. Width of Dado: 1-1/8 in.
  • Miter Gauge Groove: 3/8 in. x 3/4 in.
  • Chip Exhaust Opening: 4 in. and 5 in.
  • Table Height: 35 in.
  • Size of Cast Iron Top (with wings only): 31 in. x 40 in.
  • Table Size with BIESEMEYER® Table, Wing & Laminate Board: 31 in. x 64 in.
  • Length: 66-1/2 in.
  • Width: 37 in.
  • Width with Fence on Saw: 46 in.
  • Height: 35 in.
  • Weight: 624 lbs.

Sold at

Sold on AmazonSold at Home DeoptSold on Acme ToolsSold at Performance Tools

Skip to content